HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2316
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface
One 10/100 Fast Ethernet RJ-45
One Reset Button
One Antenna Switch
One RP-SMA Connector
LED Indicators:
1x Power (Status)
1x LAN (10/100Mbps)
1x WLAN (Wireless Activity)
3x Link Quality (Client Bridge mode)
Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 24V/0.6A DC
Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17, EN60950
RF SPECIFICATIONS:
Frequency Band: 2.412~2.472GHz
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operating Channels: 11 for North America / 14 for Japan / 13 for Europe
Receive Sensitivity (Typical):
IEEE 802.11g
-92dBm @ 6Mbps
-74dBm @ 54Mbps
IEEE 802.11b
-97dBm @ 1Mbps
-89dBm @ 11Mbps
Available Transmit Power (Average):
IEEE 802.11g
28dBm @ 6~24Mbps
26dBm @ 36Mbps
24dBm @ 48Mbps
23dBm @ 54Mbps
IEEE 802.11b
28dBm @ 1~11Mbps
Antenna:
Internal: Directional Panel Antenna; Peak Gain 10dBi
Horizontal -3dB Bandwidth: 70°
Vertical -3dB Bandwidth: 35°
Antenna Polarity: Dual-Polarized; Vertical/Horizontal
Polarity Selection: Software Controlled
External: RP-SMA Female Type
SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router / WDS
LAN: DHCP Server / DHCP Client
VPN: VPN - pass through
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate 802.11b/g: 108(SuperG), 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long Distance Transmission: 1km to 30km
Transmit Power Table
Signal Strength LED Indicators (3 colors)
Narrow Bandwidth Support 5/10/20MHz
PING Function and Trace Route Function
PPPoE (Client Router mode)
Multiple SSID Support (up to 4)(Access Point mode)
802.1q VLAN Tagging Support
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in Beacons
MAC Address Filtering (up to 50)
Wireless STA (Client) Connected List
QoS: WMM
MANAGAMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: V1, V2c
MIB: MIB I, MIB II (RFC1213) and Private MIB
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change
ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0%~90% Typical
Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
Weight: 0.84lb. (380g
Integrated Dual Polarity Antenna Design
o Selectable vertical or horizontal antenna polarization
o Operates in horizontal polarity to avoid interference from standard vertical-polarized Wi-Fi devices
o Allows service provider to utilize multi-polarization for best performance
· Waterproof Cable Accessory Kit
o Prevents rain and dew get into the device through cables and connector holes
o Ensures higher waterproof quality against water and moisture
· High 600mW Wireless Power
o Ensures robust signal to overcome long distances
o Offers superior WiFi coverage over leading brands
· Dual Antenna Design
o Embedded 10dBi DUAL POLARITY panel antenna with external connector for upgradeable antenna
o Perfect for both Point-to-Point and Point-to-MultiPoint applications
· Signal Strength LED Indicator (Client Bridge Mode)
o Allows network installer for easy deployment
· Multiple Wireless Names (AP mode)
o Broadcasts multiple SSID’s in one device
o Permits different levels of network access (VLAN Tagging)
· Power-over-Ethernet (24V PoE) Capable
o Power and data over one single cable for convenient installation
o Less heat dissipation to ensure reliable performance
o Capable of 300 feet PoE cable length
o Power Injector Included
EOC2611P is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with Super G. With dual polarization antenna, it features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. With IPx4 protection, it can provide effective in keeping out water.
It supports distance control by 1km to 30km and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
The attractive design, high performance, and array of features make EOC2611P a suitable wireless solution for your residence or office.
Mua hàng 
Download file
